There are many ways that you can repair your garage door on your own. However, for the sake of your own safety, there are some instances where you should leave the job to a handyman. Also, there may be areas of door repair that you don’t understand. In these cases, calling a handyman is best because it stops you from making the problem worse.
1. Determine the Problem
In order to decide if you garage door replacement Pembroke Pines fix the problem, you need to first determine what it is. Take a look at the mounting brackets that hold the track in place and inspect the track for obstructions. You can easily tighten a couple of screws and bolts or remove a little dirt without the help of a handyman. Inspect the door itself as well and ensure that there are no breaks in the panels or on the edges. Sometimes, a door is just physically obstructed by some small piece of dirt that can be easily removed or by a break in the edging on the door that can be repaired with wood glue or some other easy fix.
2. Inspect the Springs
If you have a garage door that swings up using a large spring in the middle, do not try to repair that spring. It holds a heavy amount of tension and could seriously injure you if you try to fix it. Inspect it carefully for breakage or rust. You may have a garage door with springs on the hinges in the sides. These are less dangerous but could still cause you some damage. Inspect them in a similar manner, but if they are broken, it is best to call a handyman.
3. Inspect Electrical Connections
If you use an electric door opener, there may be a problem with the electrical connections that operate the device. Inspect the area for obstructions and for dirt that could be interrupting the electrical connections. Inspect the antennae at the top of the garage door for the same. If it appears that there is an issue with the wires that form the connections, or the garage door opener itself, it may be best to consult a professional.